• Dust collector Filter bag

Dust collector Filter bag

Dust collector filter bag is used industrial emissions,filter dust,usefull dust,High-temperature gas dust and other dust filtration equipment, there are PPS, polyester, Nomex, PTFE material and so on.China Bag Filter Housing, China Dust collector Filter bag Suppliers and Manufacturers Directory - Source a Large Selection of Dust collector Filter bag Products

  • Dust collector Filter bag
  • Material: PPS
  • SIZE: custom-made

Product Introduction

Dust collector Filter bag
Because each dust catcher has its own characteristics and the system parameters so choose a suitable gas filter material must understand the following parameters:temperature, Humid degrees, Dust diameter, Gas Chemical Properties, Abrasive dust, dust catcher mechanical Solid.As cleaning manner,the condition of install ,ect.In general , our dust filter bag will be used industrial emissions,filter dust ,usefull dust , High-temperature gas dust and other dust filtration equipment..

Appropriate use of media, not only the need to consider filter chemical properties, also take into account the characteristics of dust. We can choose filter media by different physical and chemical methods of treatment according to the dust characteristics, To achieve the most effective filtration.

Polyester industrial Dust collector Filter bag specification:

Material Polyester
Weight(g/m2) 550g/m2
Thickness(mm) 2.0+/-0.2
Air permeability(m3/m2*min) 15
Tensile Strength(N/5*20cm) Warp ≥1000
Weft ≥1100
Elongation(%) Warp ≤35
Weft ≤40
Working Temperature 130degrees
Peak Temperature 150degrees
Finishing Treatment Singed,Calendering,PTFE membrane,anti static,water and oil proof
Nomex Dust collector Filter bag specification:
Normal maximum continuous operating temperature is 204degrees. General applications for Aramid felt include: highly abrasive dust applications, electric arc furnaces, high temperature dryers, cupolas, and chemical applications where high temperatures exist. Aramid offers a good resistance to alkalis under most condition. Most mineral oxides cause degradation and partial decomposition. Aramid withstands common organic solvents very well. Some phenolic compounds cause solubility.

1.Material: nomex(Aramid felt )
2.Weight: 450g,500g,550g
3.Working temperature: 204℃
4.Peak temperature: 240℃
5.Finishing: Calendering ,PTFE coating

Material Nomex / Nomex scrim
Weight(g/m2) 450 500 550
Thickness(mm) 2 2.2 2.4
Air permeability(m3/m2/min) 21 17 14
Tensile Strength Warp >800 >800 >800
Weft >1100 >1200 >1300
Elongation(%) Warp <35 <35 <35
Weft <55 <55 <55
Burst Strength(Mpa/min) 2.55 2.4 2.35
Continues Working Temperature ≤204(℃) ≤204(℃) ≤204(℃)
Instant Working Temperature 240(℃) 240(℃) 240(℃)
Acid Resistance fine
Alkalil Resistance good
Abrasion Resistance good
Hydrolyte Resistance fine
Finishing Treatment singeing,calendring,or teflon coated

Related Products